Download Instruction Manual
Download Pre-digital Control Article
Download Video Standards Article
Download News Release
Part Number: VM771
Title: Video Master Video Automatic Gain Control System
Category: A/V Baseband
Industry: CCTV/Security, TV/Radio Broadcast, CATV Cable Industry
|The VM771 VIDEO MASTER is a baseband video processor that stabilizes video levels, clamps out low frequency interference, and automatically corrects Luminance-to-Chrominance Inequality. The VM771 input level operating range is 0.5 to 2.0 Volts peak- to-peak. Within this input range the VM771 will control the following parameters at the output:
1. Sync level is automatically gain-regulated to 40 IRE Units.
2. White level is automatically gain-regulated so as not to exceed 100 IRE Units (but still permits a fade to Black). White level is not clipped, but retains a linear gray scale.
3. Output video level is regulated to 1 volt peak-to-peak (at 100% White level).
4. Luminance-to-Chrominance ratio is automatically corrected, thus compensating for cable slope loss or other sources of high frequency attenuation.
5. Back Porch Clamping eliminates all incoming low frequency interference such as 60 cycle ground loops, even when the video signal is removed!
Since VM771 processes sync and picture peak voltages through a time-gated Automatic Level Control System, the time relationships within a video signal remain unaffected. Therefore horizontal Sync, Color Burst Timing, and Chrominance Phase retain their original relationship. This feature distinguishes the VM771 from Proc Amps that strip and re-insert new sync signals.
The VM771 insures constant standard video signals even though video from a multitude of variable level sources are used. This helps to insure correct CATV Scrambler operation and video recording levels.
Each VM771 is a Stand-alone device, requiring no front panel rack space, “Mainframe”, or other common equipment. The Processor can be mounted on the side rail on the back of a rack directly behind the TV Modulator Switcher or other video equipment. The Processor is in a fully RF shielded metal enclosure, allowing operation in the vicinity of potential sources of RF interference. No adjustments of any kind are required at any time so the Processor can be mounted out of the way. A “Video Presence” indicator shows that a video signal is present at the output to identify signal continuity.
If this product page shows “out of stock” the product is in production and can be purchased with a lead time of 1-2 weeks or less depending on quantity. To place an order for this product call 1-800-235-6960 and ask for the sales department. Or E-Mail your order to firstname.lastname@example.org. Most orders ship within a few days.
|Level||0.5 to 2.0 Volts peak-to-peak|
|Maximum 60 Hz||2.0 Volts peak-to-peak|
|L.F. Interference reduction||100 IRE reduced to 1 IRE Unit|
|H.F. Loss Compensation||10 dB (at 3.58 MHz)|
|Video Level||1 + 0.01 Volts peak-to-peak|
|Sync Level||40 + 1 IRE Unit|
|White Level||100 + 2 IRE Units (maximum)|
|Back Porch||Ground Potential + 0.01 Volts|
|Luminance-to-Chrominance||0.2 dB (100 KHz/ 3.58 MHz)|
|Signal-to-noise ratio||> 70db at 1 Vpp Input (4.2MHz)|
|Size||4.70″ L x 3.70″ W x 1.40″ D|
|Shipping Weight||2 lbs|
|Display Indicator||Green “Video On” L.E.D.|
|Mounting||Rear rack mounting bracket|
|Power Requirement||18 VDC 350 MA wall mount included.|
OPTIONS VM771-001 Dual video output. VM771-002 For Microwave subcarriers VM771-003 Non-standard gain (microwave) VM771-004 White clip & Power Off Bypass VM771-005 -24 VDC Power Supply Input VM771-006 -48 VDC Power Supply Input VM771-007 Threaded Power Connector PMS700-5 Front Rack Mount (3.5" high)