Shop

Audio Loss Detector

AVI473 Audio Video Loss Indicator

$675.00

AUDIO VIDEO LOSS INDICATOR
Download Specifications
Download Instruction Manual
Download Related Article
Download Related Article

Part Number: AVI473
Title: AUDIO VIDEO LOSS INDICATOR
Category: A/V Baseband Products
Industry: CCTV/Security, TV/Radio Broadcast,
CATV Cable Industry

The AVI473 AUDIO Video Indicator provides two independent form C relay contact closures for loss of audio and video service. These contact closures can be used to operate an external program switch or remote maintenance alarm. The unit has an audible alarm sounder that can be separately field programmed for audio loss, stereo inversion, and video loss.

Product Description

AUDIO VIDEO LOSS INDICATOR
Download Specifications
Download Instruction Manual
Download Related Article
Download Related Article

Part Number: AVI473
Title: AUDIO VIDEO LOSS INDICATOR
Category: A/V Baseband Products
Industry: CCTV/Security, TV/Radio Broadcast, CATV Cable Industry

Description:

The AVI473 AUDIO Video Indicator provides two independent form C relay contact closures for loss of audio and video service. These contact closures can be used to operate an external program switch or remote maintenance alarm. The unit has an audible alarm sounder that can be separately field programmed for audio loss, stereo inversion, and video loss.

A loss of audio program triggers the relay switch after a field programmable time delay. This allows for normal pauses in the audio programming material. The time delay can be set from 1 second to 64 minutes. The relay will switch and the internal alarm will sound when the audio has failed and the count-down time delay has been reached. If the audio is restored before the count-down time delay has been reached, the system will reset the counter and again wait for the audio to fail.

The unit has front panel L.E.D. indicators for Left and Right audio, Stereo Inversion, and Audio Loss.

Audio alarm trigger sensitivity level can be set from the front panel using the “TRIGGER LEVEL” control. You can set the unit to operate on Low level or high level audio signals. The Left and Right Audio indicators are used to set this control.

The video signal loops through the unit so that signal transmission is not lost if power is removed from the AVI473. A field programmable video alarm delay can be set to prevent false alarms caused by short duration sync loss, non vertical interval switching, or any other momentary loss of video.

This unit uses PLL “Phase-Lock-Loop” technology to prevent false alarms due to high level noise. This is especially useful on satellite feeds and microwave transmission, when loss of video produces high level noise. The AVI473 will operate in high level noise environments. A red front panel L.E.D. indicates the loss of video.

Both the audio and video indicators each have an independent front panel switch allows the operator to set the mode of alarm operation. The “AUTO” position will automatically reset the alarm relay when the audio or video returns. The “Hold” position will hold the alarm on after any loss of audio or video, and the “Reset” position will turn off the alarm functions.

The unit fits into the RMS-400 mainframe and power supply. Up to nine AVI473 units can fit into one RMS-400 mainframe.

AUDIO

Audio Channels Per Card, Stereo Left/Right or Mono

Programmable Time Delay, 1 Second to 64 Minutes

Input Impedance, High Impedance Bridging

Input Common Mode Reject, 50 dB min, 60 dB average

Input Level (APL), -10 dBm to +8 dBm

Alarm Sensitivity, Adjustable Trigger Level

Maximum Head Room, +21 dBm

Audio Mode Switch Control, 3 Position Toggle Switch

Audio Loss Indicator, Front Panel Red L.E.D.

Stereo Inversion Indicator, Front Panel Red L.E.D.

Audio Input Status Indicators, Front Panel Green L.E.D.

Audio Connectors (Balanced), Screw Terminal (Wire)

Audio Alarm Relay Output, Form “C” Relay 1 A @ 30 VDC

Relay Connectors, Screw Terminal (Wire)

Audible Alarm, Field Selectable All Functions

VIDEO

Video Standard , NTSC, PAL, CCTV, (Auto-Select)

Level (Composite Video), 0.7 to 2.0 Vp-p ( 1 Vp-p Std.)

Alarm Delay Selector, 3 Position Low, Medium, High

Input Impedance, Hi-Z, (Loop Through Bridging)

Video Mode Switch Control, 3 Position Toggle Switch

Video Loss Indicator, Front Panel Red L.E.D.

Video Connectors, Two, BNC, (Female)

Video Alarm Relay Output, Form “C” Relay 1 A @ 30 VDC

Relay Connectors, Screw Terminal (Wire)

Audible Alarm, Field Selectable Video Loss

MECHANICAL

Power requirement, RMS-400 Mainframe Power Supply (Will Hold Nine Units).

Relays have normally open and normally closed contacts.

Additional Information

Weight 3 lbs
Dimensions 12 x 12 x 6 in