Shop

VS-12 VIDEO A/B SWITCH 12 VDC

$180.00

Click here to download the manual in Word 6.0 format. Download Manual
Click here to download the manual in Word 6.0 format. Download “Mobile Video Switching” Article

Part Number: VS-12
Title: Video Switch 12 VDC
Category: CCTV, TV Broadcast, Cable TV
Industry: CCTV/Security, TV Broadcast, Cable TV

The VS-12 Video Switcher is a 12 Volt operated 2X1 video switch that can handle NTSC, CCTV and HD-TVI video signals. It is controlled by 12 Volt DC power connected to the two screw terminals on the unit. The power input is internally diode protected against reverse polarity. This video A/B switch has two BNC connectors for the video inputs and one BNC connector for the selected output.

Description

VS-12

Click here to download the manual in Word 6.0 format. Download Manual
Click here to download the manual in Word 6.0 format. Download “Mobile Video Switching” Article

Part Number: VS-12
Title:Video A/B Relay Switch 12 VDC
Category: Audio Video Baseband Products
Industry: CCTV/Security, Broadcast TV, Cable TV

The VS-12 Video Switcher is a 12 Volt operated 2X1 video switch. It is controlled by 12 Volt DC power connected to the two screw terminals on the unit. The power input is internally diode protected against reverse polarity. This video A/B switch has two BNC connectors for the video inputs and one BNC connector for the selected output. The video is switched using isolated relay technology so that all forms of video can be controlled with this switch.

The unit can be used to engage a hot standby source or to switch up a test pattern when main video fails. It can also be used where remote video switching must occur.

On mobile vehicles this unit can be used to switch from front camera to rear camera by powering the swtich with the backup tail light 12 Volt DC power.

Standard female BNC connectors are used for the video inputs and output, and a screw terminal connector is used for the DC power.

This switcher is housed in a sturdy ABS Plastic enclosure that is completely insulated. The unit can be mounted in the rear of your rack using the mounting ears on the unit.

Direct contact with water should be avoided because the BNC connectors are not water-proof. It is recommended that you mount the unit indoors out of harsh environments or arrange for water insulation of the BNC connectors and the unit.

Additional information

Weight 2 lbs
Dimensions 10 × 6 × 5 in