Shop

Satellite Level Alarm

SLM-771 L-BAND SATELLITE LEVEL MONITOR

$525.00

Download Specifications
Download Instruction Manual
Download Related Article
Download Related Article

Part Number: SLM-771
Title: L-BAND SATELLITE LEVEL MONITOR
Category: Digital Products
Industry:TV/Radio Broadcast, CATV Cable Industry,

The SLM-771 is an L-Band Satellite Level Monitor designed to detect measure and report the receiving level of any RF signal from 5MHz up to 2.5GHz. Use it for early warning of satellite dish and LNB signal degradation due to snow loading, bug & bird intrusions, dish misalignment due to wind or movement, and any increase in LNB loss for whatever reason. It will alert you to the signal reduction before a system failure occurs.

 

Product Description

SLM-771
Download Specifications
Download Instruction Manual
Download Related Article
Download Related Article

Part Number: SLM-771
Title: L-Band Satellite Level Monitor
Category: Digital Products
Industry: TV/Radio Broadcast, CATV Cable Industry,

Description:

The SLM-771 is an L-Band Satellite Level Monitor designed to detect measure and report the receiving level of any RF signal from 5MHz up to 2.5GHz. Use it for early warning of satellite dish and LNB signal degradation due to snow loading, bug & bird intrusions, dish misalignment due to wind or movement, and any increase in LNB loss for whatever reason. It will alert you to the signal reduction before a system failure occurs.

It has both visual and telemetry voltage outputs calibrated in dB steps and an audible alarm with a relay contact for activation of external alarms or other equipment.

The front panel LED indicators are calibrated in 1dB steps for accurate loss detection. A front panel control is used to set up the monitor and alarm level.

The meter output has a voltage that changes 100mV per 1 dB and is field adjustable for offset to match your telemetry transmission equipment. +/- 0.0 to 10 Volts is available at the meter output. The unit is fully RF shielded and can be mounted in the front or rear of your rack.

RF INPUT………………………SPECIFICATION

Bandwidth……………………..5 MHz to 2.5 GHz
Level …………………………….-55 to +20 dBm
Input Impedance………………75 Ohm
Connector……………………….Female F Type

OUTPUTS

Telemetry Voltage Range……..+/- 10.0 V (Adjustable Zero)
Telemetry Voltage Steps ……….100 mV per dB
Telemetry Voltage Impedance….600 Ohms
Telemetry Voltage Calibration…..Field Adjustable
Relay Output N.O. / N.C…………Field Programmable
Audible Alarm On / Off…………….Field Programmable

FRONT PANEL

Display……………………………….Three LED Red, Yellow, Green
Display Steps………………………. 1 dB per step
Relay Alarm Set Range……………-55 to +20 dBm

MECHANICAL

Power requirement…………………24 VAC Power Cube (included)
Current requirement………………..110 mA
Connectors (RF)……………………..F Type Female
Connectors (Power and Control)…. Plug-in Screw Terminal (6 position)
Enclosure………………………………3.5 x 4.5 x 1.5 Die Cast Aluminum
Mounting………………………………..Side Rack Mounting Bracket

 

Additional Information

Weight 4 lbs
Dimensions 10 x 6 x 6 in