Shop

IPMT-3 IP VIDEO MARGIN TESTER

$225.00

Download Specifications
Download Instruction Manual
Download Related Article
Download Related Article

Part Number: IPMT-3
Title: IP VIDEO MARGIN TESTER
Category: CCTV Products
Industry: CCTV/Security,
Description: IP Video Margin Tester

The IPMT-3 is a precision attenuator used to test IP video systems to insure that you have an adequate digital signal margin. Digital signal margin is the amount of signal level above the digital cliff that you have in your system to prevent a picture failure from occurring. IP cameras will give you a perfect picture until the network cable loss reaches beyond the minimum allowable signal level and then you suddenly get no picture at all. This effect is called the digital cliff, because like walking off of a cliff, everything is great till you take the last step off the edge and then all is lost.

This test tool will pass all forms of P.O.E. Power Over Ethernet

 

14 in stock (can be backordered)

Description

IPMT-3
Download Specifications
Download Instruction Manual
Download Related Article
Download Related Article

Part Number: IPMT-3
Title: IP VIDEO MARGIN TESTER
Category: CCTV Products
Industry: CCTV/Security,

Description: IP Video Margin Tester

When you install an IP camera particularly when the network cable run is long, you need to know how close your system is to the cliff using the IPMT-3. This test is easy to do, just temporarily insert the margin tester’s 3dB port into the IP video line using a short jumper cable.

The IPMT-3 is a precision attenuator used to test IP video systems to insure that you have an adequate digital signal margin. Digital signal margin is the amount of signal level above the digital cliff that you have in your system to prevent a picture failure from occurring. IP cameras will give you a perfect picture until the network cable loss reaches beyond the minimum allowable signal level and then you suddenly get no picture at all.

This effect is called the digital cliff, because like walking off of a cliff, everything is great till you take the last step off the edge and then all is lost.jumper and see if the video signal is working. If you have at least 3dB of margin you can rest assured that the system will operate even when the network cable loss varies with time and weather.

If the video does not come on then the margin is below 3dB, so plug into the other ports one at a time to see how low the signal margin is. If the margin is below 3dB you should consider amplification to get more margin in the system. In this way you can be certain that the system you installed is not near the digital cliff waiting for a small change in cable loss to fail.

Besides changes in network cable loss, the camera and recorders can be damaged by lightning and power surges that degrade the output levels of the equipment bringing it nearer to the digital cliff and causing intermittent operation of the system. These intermittent camera problems are hard to diagnose without knowing that the equipment output levels have dropped. If you are called to test an intermittent camera and it is working when you get there, use this unit to introduce additional loss to bring the camera info fail mode. Use this to determine if the problem is level related or some other problem.

Use this unit to test new and existing IP installations and to trouble shoot any intermittent camera operation. This low cost tool is a must for anybody that installs IP cameras, put one in your toolbox today. Call 1-800-235-6960.

This test tool will pass all forms of P.O.E. Power Over Ethernet

If this product page shows “out of stock” the product is in production and can be purchased with a lead time of 1-2 weeks or less depending on quantity. To place an order for this product call 1-800-235-6960 and ask for the sales department. Or E-Mail your order to fmsystemsinc@sbcglobal.net. Most orders ship within a few days.

IP VIDEO INPUT ************** SPECIFICATIONS

Standard **************** All IP Video Standard

Impedance *************** 100 Ohm (IN/OUT)

Connectors *************** 2 8P8C (female)

IP VIDEO ATTENUATION ****** 7dB in 1dB Steps

NETWORK JUMPER CABLES *********** 2 (straight) included

MECHANICAL

Size ********************* 4.00″L X 2.125″W X .900″D

 

Additional information

Weight 1 lbs
Dimensions 10 × 6 × 6 in