Shop

Four Zone Video Privacy Mask

VPE-4 FOUR BLOCK VIDEO PRIVACY MASK

$720.00

Click here to download the manual in Word 6.0 format. Download Manual
Click here to download the maunal in Word 6.0 format. Download Specification Sheet
Click here to download the maunal in Word 6.0 format. Download Related Article
Click here to download the maunal in Word 6.0 format. Download Industrial Uses Article

Part Number: VPE-4
Title: FOUR BLOCK VIDEO PRIVACY MASK
Category: A/V Baseband
Industry: CCTV/Security

This unit produces four user defined masking zones on any video channel to create areas of privacy on the video image. The zone is blocked so that operators are unable to see detail in the masked area.

Product Description

VPE-4

Click here to download the manual in Word 6.0 format. Download Manual
Click here to download the maunal in Word 6.0 format. Download Specification Sheet
Click here to download the maunal in Word 6.0 format. Download Related Article
Click here to download the maunal in Word 6.0 format. Download Industrial Uses Article

Part Number: VPE-4
Title: FOUR BLOCK VIDEO PRIVACY MASK
Category: A/V Baseband
Industry: CCTV/Security

The VPE-4 unit produces four user defined masking zones on any video channel to create areas of privacy on the video image. The zone is blocked so that operators are unable to see detail in the masked area. This can be used to meet the requirements of State and local rules regarding the use of video surveillance.

It can be used to restore the presumption of privacy and still allow monitoring of sensitive areas. This low cost solution can be installed anywhere in the video path and works with existing cameras eliminating the need to buy special expensive cameras.

The ability to provide privacy on one camera without replacing the other equipment in the systems is a very cost effective solution to the privacy issue. When you have a privacy issue with any camera in your system or if a problem pops up later after installation this is a simple solution to solve the problem.

The masking zones can be set to any transparency level from totally blocked to almost completely transparent so that the operator can see a person behind the curtain like mask, but is unable to identify the private features of that person. This is particularly useful when using video motion detection without invading privacy.

This unit allows you to set the camera position for maximum security while still providing privacy for the neighbors. It will prevent the camera from seeing into an adjacent window or in applications such as jails and prisons it can be used to mask out the restroom area inside a holding cell.

FEATURES————–SPECIFICATIONS

INPUT

Level————1 Volt / 140 I.R.E. Units

Impedance————-75 Ohm (Unbalanced)

Video Standard ———CCTV, NTSC, Pal, B/W or Color

Connector————–BNC (Female) 75 Ohm

OUTPUT

Level————————Unity Gain (same as input)

Impedance——————-75 Ohm (Unbalanced)

Video Coupling—————DC (Direct Current)

Signal-to-noise ratio———< 80db (NTSC Weighing)

Frequency Response———DC – 10 MHz +/-0.2 dB

Differential gain————–> 0.2%

Differential phase————> 0.2 Deg

CONTROL

Privacy Curtains————-4 Independently Adjustable

Vertical Position Selection—-Dual Adjustable 0 – Full Screen

Horizontal Position Selection–Dual Adjustable 0 – Full Screen

Transparency Level———-Adjustable 0 – Partially Obscure

POWER REQUIRMENT

Power Requirement———-24VDC @ 300mA

MECHANICAL

Size————————8.750″L x 4.625″W x 3.00″D

Mounting——————-Four hole mounting Plate

Additional Information

Weight 4 lbs
Dimensions 12 x 12 x 6 in