Shop

ATU/ARU-8/D DIGITAL ALARM TX/RX set

$1,730.00

Download Specifications
Download Instruction Manual
Download Related Article
Download Related Article

Part Number: ATU-8D/ARU-8D
Title: Digital Alarm Transmitter/Receiver
Category:Digital Products
Industry:TV/Radio Broadcast, CATV Cable Industry

Description:

These devices will transmit contact control and alarm signals over any digital video link. The signal is encoded in the picture area prior to digitizing, so it will pass through all digital video compression systems. Most digital video compression systems block all signals in the vertical interval. This system uses the visual picture area to send contact closure information.

Available on backorder

Description

ATU/ARU-8D

Click here to download the manual in Word 6.0 format. Download Manual
Click here to download the manual in Word 6.0 format. Download Related Article
Click here to download the manual in Word 6.0 format. Download Related Article

Part Number: ATU-8D/ARU-8D
Title: Digital Alarm Transmitter/Receiver
Category:Digital Products
Industry:TV/Radio Broadcast, CATV Cable Industry

Description

The ATU/ARU-8D will transmit contact control and alarm signals over any digital video link. The signal is encoded in the picture area prior to digitizing, so it will pass through all digital video compression systems. Most digital video compression systems block all signals in the vertical interval. This system uses the visual picture area to send contact closure information.

Contact closures on the ATU-8D input will be repeated as contact closures at the ARU-8D output. This system uses one active picture line to transmit the contact information and it is field programmable from lines 20 to 25.

The ATU-8D ALARM TRANSMITTING UNIT and the ARU-8D ALARM RECEIVING UNIT together make up an 8 channel alarm and control system. The transmitter removes the picture information from the first available active line and then inserts the coded contact information. At the other end of the video link the receiver decodes the contact information and then removes it from the video signal.

A system alarm contact will operate upon loss of power to either terminal or loss of transmission path (video link failure). An internal video sync generator takes over and maintains continuous alarm system operation in the event of video signal failure.

If this product page shows “out of stock” the product is in production and can be purchased with a lead time of 1-2 weeks or less depending on quantity. To place an order for this product call 1-800-235-6960 and ask for the sales department. Or E-Mail your order to fmsystemsinc@sbcglobal.net. Most orders ship within a few days.

ATU-8D ALARM TRANSMITTING UNIT

ALARM INPUT

Channels, 8 Channels (Contact Loop)
Connectors, 20 Pos. Screw Terminal
Alarm Sense, Contact closure (Loop)
Maximum Loop Resistance, 1K ohm

VIDEO INPUT

Standard, NTSC (Color or B/W)
No Video, Internal Video Generator
Impedance, 75 Ohm
Line Strip Selection, Line 10-25 (Odd/Even)
Connector, BNC (female)

VIDEO OUTPUT

S/N Ratio, 80 dB (NTC-7 Weighting)
Differential Gain, Less Than 0.3%
Differential Phase, Less Than 0.3 deg.

MECHANICAL

Size, 5.50″L X 4.3″W X 3.0″D
Power, 24 VAC 400 mA

ARU-8D ALARM RECEIVING UNIT

ALARM OUTPUT

Channels, 8 Channels (Relay Output)
Connectors, 20 Pos. Screw Terminal
Alarm Report, A Form Relay 1Amp 24VDC

VIDEO INPUT

Standard, NTSC (Color or B/W)
Impedance, 75 Ohm
Line Strip Selection, Line 10-25 (Odd/Even)
Connector, BNC (female)

VIDEO OUTPUT

S/N Ratio, 80 dB (NTC-7 Weighting)
Differential Gain, Less Than 0.3%
Differential Phase, Less Than 0.3 deg.

MECHANICAL

Size, 5.50″L x 4.3″W x 3.0″D
Power, 24 VAC 400 mA

Additional information

Weight 8 lbs
Dimensions 12 × 12 × 6 in