Author: fmsystems

July 22, 2015

THE FMC664CR-2 BRINGS FM BAND RADIO SERVICE TO THE INTERNET

The FMC664CR2 is a digitally tuned FM band receiver that tunes through 88-108 MHz. The receiver utilizes standard FM de-multiplexing and has a Left and Right balanced and floating 600 Ohm audio output. A base-band multiplex output is also provided.

Post Tags:

July 21, 2015

VFD471 FREEZE FRAME DETECTOR MONITORS DIGITAL VIDEO SIGNALS

The VFD471 Video Freeze Frame Detector is a video switch and alarm that provides an automatic transfer of video and stereo audio when there is a Freeze Frame interruption of video service. Digital equipment will continue to send the last frame of video to your

Post Tags:

freeze frame detector freeze frame video alarm vfd471 video fail relay video freeze frame video freeze frame alarm video freeze frame detector video freeze frame relay

July 21, 2015

VM472 VIDEO MASTER IS NOW IN A RACK WITH DUAL OUTPUT AND NEW FEATURES

The VM472 VIDEO MASTER is a baseband video processor with two video outputs that automatically establish correct sync pulse amplitude, video amplitude, clamps out low frequency interference and automatically corrects any loss in high frequency response. The VM472 input level operating range is 0.5 to

Post Tags:

automatic cable eq automatic video level control video agc video gain control

July 20, 2015

VDA414C VIDEO DISTRIBUTION AMPLIFIER GET A VIDEO CLIPPER CLAMPER FEATURE

The VDA414C has the ability to clamp out low frequency interference and distortion by back-porch clamping the video signal. It also has a front panel adjustment for clipping level that allows the operator to set a hard clip level on the video to prevent over

Post Tags:

clipper clamper vda414/c video amplifier video clamp video clipper video clipping amplifier video da video distribution amplifier

July 20, 2015

NEW DVS772 HANDLES DIGITAL VIDEO SWITCHING AUTOMATICALLY

The DVS772 DIGITAL VIDEO SWITCH is a high isolation high frequency relay used to switch digital signals such as SMPTE 310 and SDTV signals up to 270Mbit rate. The switch has two inputs and one output in an A/B configuration. The switching function is controlled

Post Tags:

auto detect a/b relay automatic digital video relay digital a/b switch digital sd video relay sd video a/b switch

July 20, 2015

CM-1UTP CAMERA MASTER ADAPTOR MAKES TWISTED PAIR UTP MEASUREMENTS EASY

The CM-1 UTP is an adaptor that is used with the CM-1 CAMERA MASTER meter to measure the video levels on twisted pair wire installations. The adaptor conveniently mounts to the two BNC connectors on the top of the CM-1 CAMERA MASTER METER.

Post Tags:

cm-2 utp adaptor utp video test adaptor video test equipment video tester video utp

July 20, 2015

FM SYSTEMS, INC. NEW VTG MAKES SETTING LINE LOCK CONTROLS ON VIDEO CAMERAS EASY

The VTG Video Timing Generator provides up to ten video sync signals with which to synchronize CCTV cameras in the field. The VTG is used with the VTM Video Timing Meter to establish accurate timing of multiple CCTV cameras. It can also be used

Post Tags:

cctv line lock cctv video syncronization of video video test meter video tester video training tools

July 20, 2015

SDI-C ADDS CONTACT RELAY CONTROL ONTO ANY SDI CCTV CAMERA

These units transmit and receive contact closure alarm and control signals encoded onto any SDI video path. You can insert your contact closure alarm and control signals anywhere an SDI video signal is being used. Alarm and control signals will be carried over any distance

Post Tags:

sdi relay control sdi video sdi video contact control sdi video relay

July 20, 2015

SDI-D WILL ADD RS232 DATA TO ANY SDI CCTV SIGNAL WITHOUT ADDITIONAL WIRES

These units provide an RS422 PTZ Data Link on any HD CCTV signal. Use them to add (PTZ) Pan Tilt Zoom control to any existing video camera without running additional wires. The RS422 control signal shares the coaxial cable path in the reverse direction to

Post Tags:

ptz on sdi sdi control sdi data sdi ptz control sdi rs422

July 19, 2015

FM SYSTEMS, INC. ANNOUNCES THE V-24 STAND ALONE VIDEO A/B SWITCH

The unit can be used to engage a hot standby source or to switch up a test pattern when main video fails. It can also be used where remote video switching must occur.

Post Tags:

a/b switch video a/b switch video relay video switch

Author: fmsystems

Location

Recent Posts

Product Categories

International Inquiries